MITEL T1/E1 COMBO MMC II MODULE
MITEL T1/E1 COMBO MMC II MODULE
The T1/E1 Combo MMC combines trunking and DSP functionality on a single card.
The T1/E1 Combo card provides for resiliency. To use resiliency, you must have two 3300 ICPs running 3300 Release 7.0 software (or later) and a T1/E1 trunk connected to both ICPs. The trunk can fail over to the secondary ICP in the event of a primary ICP failure.
Features:
- Green/Red/Yellow LEDS indicating status
- Works in the following Mitel systems:
– 3300 ICP
– SX-200 ICP*
– CX and CXi controllers
Related products
-
Read moreQUAD BASIC RATE INTERFACE (BRI) FRAMER
The Quad Basic Rate Interface (BRI) Framer MMC is a digital trunk interface that supports the direct connection of BRI trunks to the controller.
-
Read moreMITEL 3300 – 128 CHANNEL ECHO CANCELER CARD
The Echo Canceller (EC) module provides echo cancellation on Ethernet to TDM (E2T) channels.
-
Read moreMITEL 16-PORT ONS LINE CARD
The Mitel 16-Port ONS Line card has 16 built-in ports.
-
Read moreMITEL MXE III CONTROLLER
The MXe III Controllers are available in two capacities: standard and expanded. Both versions include an embedded Analog Main Board and redundant cooling fans.